Wall Mounted Unit

Reverse Cycle (Heating & Cooling)






Standby Power Function InfoStandby Power Function. When the heat pump is not in use, the standby power function turns off power supply to the outdoor unit and sets the indoor unit into standby energy saving mode, reducing energy consumption.


Power-Airflow Flaps InfoPower-Airflow Flaps. Power-airflow flaps can flatten out during cooling operatin to deliver cool air to the corners of a room. The flaps can direct warm air straight down to the floor during heating operation.


Power-Airflow Dual Flaps InfoPower-Airflow Dual Flaps. Power-airflow dual flaps can flatten out during cooling operation to deliver cool air to the corners of a room. The flaps can direct warm air straight down to the floor during heating operation.


Wide Angle Louvres InfoWide Angle Louvres. Smoothly curved wide angle louvres provide wide airflow coverage for effective cooling/heating operation.


Vertical Auto-Swing
(up and down) InfoVertical Auto-Swing. This function automatically moves the flaps up and down to distribute air across the room.


Horizontal Auto-Swing
(left and right) InfoHorizontal Auto-Swing. This function automatically moves the louvres to the left and right to cover the room with cool/warm air.


3-D Airflow Info3-D Airflow. Combines vertical and horizontal auto-swing to circulate cool/warm air to the corners of large spaces.


Comfortable Mode InfoComfortable Mode. The new flap changes the delivery angle to horizontal for cooling and vertical for heating operation, to prevent cold or warm air from blowing directly onto your body.


Indoor Unit Quiet Operation InfoIndoor Unit Quiet Operation Function. Sound levels are reduced by 2-3 decibels (dB) from the low fan speed for quieter heating and cooling.


Outdoor Unit Quiet Operation InfoOutdoor Unit Quiet Operation Function. Outdoor unit sound levels can be reduced by 3dB for times when quieter operation is needed.


Intelligent Eye InfoIntelligent Eye. This is an infrared motion sensor with the ability to sense movement in the room. When you are in the room, the heat pump operates normally. If no activity is detected in a room for more than 20 minutes the heat pump automatically changes to an energy-saving operation.


New 2-Area Intelligent EyeInfoNew 2-Area Intelligent Eye. The New 2 Area Intelligent eye can now either direct airflow towards you or away from you for draft-free comfort or when both areas are occupied, automatically activate comfort airflow mode to maintain conditions in both areas. If the room is unoccupied for 20 minutes, the unit automatically goes into energy saving operations.


Automatic Operation InfoAutomatic Operation (reverse cycle only). For year-round comfort, this function allows the unit to automatically switch between heating and cooling modes as required.


Program Dry Function InfoProgram Dry Function. The system reduces the humidity in the room while maintaining the temperature as much as possible.  It automatically controls the temperature and airflow rate and will switch into cooling mode if the room temperature increases too much.


Auto Fan Speed InfoAuto Fan Speed. To reduce operating noise, the fan speed is automatically controlled by the micro-processor to suit the thermostat setting and prevailing room temperature.


Hot Start InfoHot Start. When heating commences, or when changing from cooling to heating, airflow doesn't start until the air is warm, preventing cold draughts.


Titanium Apatite Deodorising Air Purification Filter InfoTitanium Apatite Deodorising Air Purification Filter. Traps microscopic particles, decomposes odours and helps absorb and deactivates bacteria to purify the air in your room.


Air-Purifying Filter InfoAir-Purifying Filter. Traps microscopic particles.


Wipe Clean InfoWipe Clean. The panels of the heat pump can be cleaned with a cloth across the smooth surface.


Econo Mode InfoEcono Mode. Controls the upper limit of frequency, reducing power consumption. This reduces the load on the electrical circuit when multiple electrical devices are used simultaneously.


Powerful Operation InfoPowerful Operation. Pushing the POWERFUL button on the remote control gives you a boost in cooling and heating power for a 20-minute period, even if the unit is already operating at high capacity.


LCD Wireless Remote Control


Indoor Unit On/Off Timer


24-Hour On/Off Switch Info24-Hour On/Off Timer. The timer can be preset to start and stop the heat pump at any time within a 24-hour period. Once the times are set, the heat pump can be operated for a period by simply pressing the ON or OFF timer buttons.


Weekly Timer InfoWeekly Timer. This function makes it easy to enter up to four settings per day for each day of the week. It not only allows you to program on and off time, but also the desired temperature.


Night Set Mode InfoNight Set Mode. Through the use of the ‘Timer-OFF Circuit’, the preset room temperature gently rises in cooling or falls in heating before the unit stops. This energy efficient feature allows you to sleep comfortably without feeling a sudden change in the room temperature.


Auto-Restart after Power Failure InfoAuto-Restart. The unit memorises the operation mode, airflow and temperature settings. Should there be a power failure when the unit is in operation, it will automatically return to the same operating conditions when the power is restored.


Self-Diagnosis with Digital Display InfoSelf-Diagnosis with Digital Display. In the unlikely event that a problem develops with the unit, malfunction codes can be displayed on the liquid crystal panel of the remote control for fast and easy fault diagnosis.


Anti-Corrosion Treatment of
Outdoor Heat Exchanger Fin InfoAnti-Corrosion Treatment. The special anti-corrosion coating on the outdoor unit heat exchanger ensures greater resistance to salt damage and atmospheric corrosion.


Demand Enabled Response (DRED) InfoDemand Enabled Response (DRED) DRED allows the electricity provider to independently control the capacity of the system at various pre-programmed levels. The electrical provider can then better manage the stress placed on the power grid during peak demand.


Wireless LAN Connection InfoWireless LAN Connection. Wi-Fi connection lets you set and even schedule the temperature from anywhere using Android and Apple systems. So you can easily and efficiently remotely manage the unit for optimal climate when arriving home.

5 4

0.5°C Step Room Temperature Control Info0.5°C Step Room Temperature Control. Room temperature can be adjusted precisely in increments of 0.5°C to ensure optimal comfort conditions.


1 Only available for 2.0-4.6 kW Class
2 Only available for 5.0-7.1 kW Class
3 Only available in Reverse Cycle Models
4 Optional Accessory
5 Optional Accessory, Remote Control PCB also rquired (KRP067A41 for 20-46 Class, KRP980B2 for 50-71 Class)


P-Series Controller

Backlit Wireless Remote Controller (FTXM)

This remote controller with a backlit liquid crystal display and four luminescent control buttons for major features, also includes a built-in weekly time clock that can be programmed to suit your personal lifestyle with up to four actions per day of the week. This advanced controller not only allows you to program on/off time, but also the desired temperature. Futhermore, the copy function enables any daily program to be replicated on any other day or days as required.

Other functions include:

  • 24 Hour timer
  • Weekly timer
  • Night set mode
  • Self diagnosis with digital display
  • Comfortable mode
  • Econo mode

D-Mobile App - Wi-Fi Control for your Daikin Wall Mounted Split

D-Mobile puts your heat pump's frequently used functions at your fingertips with an easy to use app.

In conjunction with Daikin's BRP072A42 wireless LAN adaptor, the easy to use D-Mobile app lets you use your smartphone or tablet to operate your Daikin wall mounted heat pump unit via Wi-Fi or the internet.

Three Ways to Connect:

  • Direct Connection: For locations without a Wi-Fi network, the app can wirelessly connect directly to the wireless LAN adaptor equipped heat pump, when in range.
  • Wi-Fi Connection: A wireless LAN adaptor equipped heat pump can easily be joined to a local Wi-Fi network. Once connected, the system can be controlled from any networked Android or iOS device.
  • Internet Connection: Monitor and control your system from virtually anywhere, adjusting temperature and setting for a comfortable environment ready for when you arrive home. With no subscription costs from Daikin, all you need is a permanent internet connection for Wi-Fi network, and an internet connection for your phone or tablet.


Tech Specs: 

 FTXM (Reverse Cycle)

Rated Capacity Cool (kW) 2 2.5 3.5 4.6 5.0 6.0 7.1 8.5 9.4
Heat (kW) 2.8 3.3 4.0 5.4 6.1 7.3 8.1 9.0 10.3
Capacity Range Cool (kW) 0.9-2.8 0.9-3.7 0.9-4.2 0.9-5.5 1.1-6.7 1.1-7.5 2.0-8.9 2.0-10.5 2.0-11.2
Heat (kW) 0.9-4.4 0.9-5.4 0.9-5.5 1.0-6.7 1.0-8.5 1.0-9.8 2.0-10.8 1.9-11.6 1.9-12.0
Indoor Airflow Rate (Hi) Cool (l/s) 152 167 175 203 267 310 358 372
Heat (l/s) 157 168 183 202 287 333 328 422 413
Indoor Fan Speeds C/H 5 steps, quiet and automatic
Energy Label/Star Ratings Cool 5 3.5 3 4 3 2.5 2
Heat 5 4.5 3 4.5 4 3.5 2.5 2
Front Panel Colour   White
Power Supply    1 phase, 220-240V, 50Hz
Power Input (Rated) Cool (kW) 0.40 0.49 0.81 1.20 1.14 1.52 1.93 2.49 2.79
Heat (kW) 0.58 0.68 0.87 1.41 1.34 1.70 1.98 2.42 3.07
E.E.R / C.O.P Cool/Heat 5.00/4.83 5.10/4.85 4.32/4.60 3.83/3.83 4.39/4.55 3.95/4.29 3.68/4.09 3.41/3.72 3.37/3.36
A.E.E.R / A.C.O.P Cool/Heat 4.82/4.77 4.95/4.81 4.20/4.56 3.79/3.80 4.33/4.52 3.91/4.27 3.53/4.00 3.31/3.62 3.27/3.28
Dimensions (HxWxD) Indoor (mm) 285x770x223 295x990x263 340x1200x259
Outdoor (mm) 550x675x284 695x930x350 990x940x320
Weight Indoor (kg) 9 13 17 18
Outdoor (kg) 28 30 51 54 60 80 82
Compressor Type   Hermetically sealed swing type
Refrigerant Type   R32
Max Pipe Length (m) 20 30
Max Level Difference (m) 15 20
Pipe Sizes Liquid (mm) 6.4
Gas (mm) 9.5 12.7 15.9
Outdoor Operating Range (Outdoor Temp) Cool (CDB)  -10 to 46
Heat (CWB) -15 to 18
Indoor Sound Level (H/SL) Cool (dBA) 38/19 40/19 42/19 44/26 45/28 48/29 49/30 51/37 53/38
Heat (dBA) 39/20 40/20 42/20 43/26 45/28 48/29 49/30 51/35 52/35
Outdoor Sound Level (H/SL) Cool (dBA) 46/43 47/43 49/44 47/44 49/45 53/49 54/51
Heat (dBA) 47/44 48/44 50/45 49/45 48/45 52/45 54/49 56/51 55/51
Outdoor EPA Sound Power Level (H) Cool (dBA) 58 59 61 59 61 65 66
Heat (dBA) 59 60 62 61 60 64 66 68 67

Product Brochure: 

Daikin Split System Heat Pump Brochure New Zealand

Download Brochure:

Download Adobe Reader You need the program Adobe Acrobat or Adobe Acrobat Reader to open the documents. The program Adobe Acrobat Reader is a freeware program and can be downloaded from www.adobe.com

Product Support: